Features
Door – Solid door slab with a protective thickness of 50 mm (2″) forms the basis of the door, which has an overall thickness of 165mm. Filled with a specially formulated Chubbsafes F80 barrier material reinforced with steel fibers provides resistant to high speed drilling, oxy-acetylene cuttings and jack attacks.
Boltwork – Secured by a 7 active front bolts, 2 active top bolts, 2 active bottom bolts and 7 passive back bolts. Each bolt has a diameter of 32mm.
Locking – Secured with a single 3-wheel Keyless Combination Lock capable of 1,000,000 change codes and a 8-levers double bitted Key Lock as standard. Both Locks operated independently of each other. Key Lock is protected by Manganese Plate.
Relocker – Keyless Combination Lock is protected by Glass Relockers. Any forced attempt to dislodge the locks would activate these secondary locking devices. This restricts the movement of the internal boltwork system.
Relockers are further protected by Tungsten Carbide pin plates to serve as extra protection.
Frame – The “wrapped around the wall” door frame is fabricated from steel sections, bent to form a single structure. Vestibule side frames at full height of the door are attached to the frame and grip the inside of the wall. This design provides stronger resistance against attacks to the door.
Options
Grille Gate – An Optional Grille Gate can be fitted to the door for ventilation during the day or as control when the door is open. The Grille Gate is secured by two high security 5-levers Mortice Deadlocks.
Finish – The door comes standard with a painted grey primer finish with an option for a stainless steel cladded finish.
Locks – A Dial Check Lock and Blinder Shield can be fitted as an option to the combination lock. Two or three movement Timelocks or electronic combination lock are also available.
Protective Material – Instead of the Chubbsafes F80 barrier material, the burglary resistance of the door can be further enhanced by replacing it with the Chubbsafes FXP160 specially formulated barrier material.
When ordering, please state:
a) Wall thickness.
b) Type of wall e.g.brick, R.C.etc.
c) Hung of door required.
d) If to be installed in multi-storey building, state floor level.
e) Path of access to where door is to be installed.